50mm 360° Addressable LED Ball String: Technical & Application Guide for Programmable Decorative Lighting Projects
50mm DC24V UCS1903 Addressable LED Ball String for Decorative Lighting Projects
This 50mm addressable LED ball string is designed for professional decorative lighting projects that need 360-degree visibility, programmable RGB effects, custom spacing and reliable outdoor installation. It can be used for outdoor hanging displays, shopping mall atriums, stage pixel arrays, tree decoration, facade lighting, festival installations and 3D visual effects.
Product Concept
A 50mm addressable LED ball string is different from a flat LED strip or a one-direction pixel module. The round ball diffuser allows the light to be viewed from multiple directions, which is important for suspended, tree-mounted, facade-mounted and 3D decorative installations. Each ball works as a controllable RGB pixel, making it possible to create flowing color, chasing, scanning, fading and video-style effects with a suitable controller.
Key Product Parameters
| Parameter | Product Data | How It Becomes a Project Selling Point |
|---|---|---|
| Model No. | L-C506-UCS1903 | Clear model reference for samples, quotations, repeat orders and production confirmation. |
| Part No. | L-C506-24V | Identifies the DC24V version and reduces confusion during procurement. |
| Diameter | 50mm | Large enough to create a visible decorative point for facades, trees, ceilings and 3D arrays. |
| IC Chip | UCS1903 | Supports addressable control and dynamic programming when matched with a compatible controller. |
| Light Source | 6 pcs RGB SMD5050 LED chips | Provides full-color RGB effects with brightness distributed through the ball diffuser. |
| Operate Voltage | DC24V | Better suited for professional string projects than very low-voltage short decorative runs. |
| Wattage | 1.44W per ball | Helps calculate total power load, power supply capacity and power injection positions. |
| Beam Angle | 360 degrees | Ideal for hanging, tree, ceiling and 3D installations where the light is viewed from different directions. |
| Standard Chain | 20 pcs per chain, 12cm spacing | Convenient for standard layouts, while spacing can be customized for project density. |
| Cover Options | Milky white cover or transparent cover | Milky cover gives softer diffusion; transparent cover gives a clearer pixel-point appearance. |
| Connector | 3PIN JST or waterproof connector | Supports both sample testing and outdoor project installation requirements. |
| Lifetime | 50000H | Important for commercial installations where replacement cost and maintenance access matter. |
| Working Temperature | -20℃ to 60℃ | Suitable for many outdoor decorative and seasonal lighting environments. |
Dimension, Structure and Wiring References
The product detail images are useful for technical confirmation before ordering. For B2B buyers, these images help confirm ball size, string structure, cable layout, connector direction, internal PCB design and customized spacing requirements before sample or bulk production.
Light Effect and Cover Options
The 50mm ball can be made with a milky white cover or a transparent cover. The milky cover creates softer diffusion, which is useful for close-view decorative projects. The transparent cover gives a sharper pixel look and makes the internal LED structure more visible.
Real Application Scenes
Real project images are important because buyers need to understand where the product can be used. These 50mm addressable LED ball strings are suitable for outdoor hanging installations, public decorative lighting, commercial displays, event spaces, stage pixel arrays, shopping mall ceiling displays and programmable 3D lighting projects.
Why 360-Degree Viewing Is a Real Advantage
Visible from Front, Side and Below
Many decorative projects are not viewed from one fixed angle. In shopping malls, atriums, trees, outdoor plazas and hanging displays, visitors may see the product from below, the side or a distance. The 360-degree ball structure gives a more complete visual effect than one-directional pixel modules.
- Suitable for suspended 3D pixel ball installations.
- Good for tree lighting and landscape decoration.
- Useful for building facade point effects.
- Better visibility for mall atriums and event displays.
- Milky cover can reduce harsh glare in close-view projects.
Programmable Control and Artnet Effects
The product page mentions separate control with UCS1903 and Artnet controller support. This means the LED ball string can be used for programmable effects such as color fading, skipping, scanning, chasing, flash and video-style display. For large commercial projects, the controller should be selected according to pixel quantity, IC protocol, signal distance, power layout and required animation content.
Application Scenarios
Selection Checklist Before Ordering
Information Needed for a Reliable Quotation
LED ball string projects often require customized length, customized spacing, multiple strings and controller matching. A clear inquiry helps avoid repeated communication and reduces the risk of wrong production.
- Total quantity of LED balls or number of strings.
- Required spacing between each ball.
- Milky white cover or transparent cover.
- Indoor, semi-outdoor or outdoor installation environment.
- Connector type: 3PIN JST or waterproof connector.
- Controller plan: Artnet, pixel controller or other system.
- Installation method: hanging, tree mounting, facade mounting or 3D array.
- Destination country and expected delivery timeline.
Why Contractors Should Confirm Details Before Production
In decorative LED ball projects, the biggest risk is not only product quality. Wrong spacing, wrong connector, wrong waterproof version, wrong controller protocol or poor power planning can create expensive on-site rework. For suspended or large-array projects, specification confirmation before production is especially important.
Need 50mm Addressable LED Ball Strings for a Project?
Like Light can help confirm IC, voltage, spacing, cover type, connector, waterproof version and controller matching before production.
FAQ
Can the spacing between LED balls be customized?
Yes. The standard spacing is 12cm, and pitch can be customized according to the project layout, hanging height and required visual density.
Is this LED ball string suitable for outdoor projects?
The product parameter table lists IP67, and the description mentions IP68 with silicone waterproof protection. For outdoor use, confirm the final waterproof version and connector type before production.
What controller can be used?
This product uses UCS1903. Artnet controller support is mentioned on the product page, but the final controller should be selected according to pixel quantity, signal layout and show requirements.
What is the difference between milky white cover and transparent cover?
Milky white cover gives softer and more diffused light. Transparent cover creates a clearer and sharper pixel effect. The choice depends on viewing distance and final project style.
What information is needed for quotation?
Please provide quantity, string length, spacing, cover type, connector type, waterproof requirement, controller plan, installation method and destination country.
