2024-09-23
How to cut and connect LED strip lights
How to cut and connect LED strip lights
Cropping method :
- Locate the cut : Observe the surface of the strip and find the small scissors mark that represents the cut.
- straight line clipping : Use scissors to cut straight lines along the small scissors mark, making sure not to cut the lines on the FPC board.
- leave room : be careful not to cut crooked, leave the pad left and right, convenient subsequent welding .
Connection method:
- Determine the length : integer the interceptor strip according to the length to be installed.
- Connecting tail plug : Connect the tail plug at the tail end of the lamp belt .
- Insert the pin : Insert the pin into the lamp strip, then connect the plug .
What do I need to pay attention to when connecting LED lights?
Determine the power supply type :
It is clear whether the LED light belt is a high or low voltage power supply, and choose a low voltage LED light belt to ensure the safety of electricity consumption.
Connection method :
According to the lamp type, select the appropriate wiring method, such as welding, terminal connection or driver connection.
Make sure that the positive and negative terminals are correctly connected to avoid failure or damage to the light belt caused by reverse connection.
Make sure that the positive and negative terminals are correctly connected to avoid failure or damage to the light belt caused by reverse connection.
Safe operation :
Be sure to turn off the power before wiring to avoid the risk of electric shock.
Use insulating tools and materials to ensure the safety of the joint.
Use insulating tools and materials to ensure the safety of the joint.
Testing and checking :
After the wiring is completed, the power test is carried out to ensure that the LED light belt works normally.
Check the connection of the LED strip regularly to ensure that it is not loose or damaged.
Check the connection of the LED strip regularly to ensure that it is not loose or damaged.
What are the common faults and solutions of LED lights?
- Bulb burnt out : check the power supply, try to replace other lamp test; Check the poor contact, clean the metal contact part; Consider the lamp holder failure, if necessary replace the new lamp holder .
- driver damaged : check the power cord and plug to ensure that they are not damaged or loose; Replace drives that show obvious signs of damage and make sure the new drive parameters match .
- Circuit fault : Check the switches and lines to ensure that there is no damage or poor contact; Use test tools to locate faults and repair or replace faulty circuit components .
- lamp aging : check the use time of the lamp, such as has reached the life, need to replace the new LED tube .
- installation problem : check whether the lamp belt is firmly installed, without loose or poor contact; Avoid over-twisting or squeezing the lamp belt during installation.
LIKELIGHT is a professional manufacturer of light strips, we support OEM and ODM, and can also advise you on your project.Please contact us if necessary LIKELIGHT:+86-755-23328395, email :contact@like-light.com,WhatsApp:86-132-66666-320.
