Addressable Controlled independently MR-228A controller

1. MR-228A supports standard USITT DMX512/1990 general protocol and extended DMX512 protocol;
2. MR-228A supports TTL serial return-to-zero code protocol and supports multi-chip selection;
3. Controller signal output ADRI/PO end can realize DMX512 channel automatic addressing, support DMX512AP-N/NB, UCS512, MY7221, WS2821, UCS512C, SM16512 and other driver chips;
4. The addressing signal output of MR-228A controller is compatible with the output differential signal, which improves the transmission distance of the addressing signal, which is conducive to the long-distance transmission and effective addressing of the addressing line in the project application;
5. Three primary color independent brightness control, making accurate adjustment of white balance more simple and effective;
6. Support monochrome, two-color, RGB, RGBW, RGBWY, and multi-color mixing control;
7. 32-65536 gray 16Bit conventional control, depth optimization up to 262144 gray, can truly restore the image color and details;
8. Accurate adjustable Gamma correction algorithm, more in line with human visual sensitivity characteristics, display more fully rich colors, so that the designer animation or video effect is perfect;
9. Enable and disable the function of writing DMX address and parameters;
10. Support a maximum of 120 frame change frequency to ensure high-definition display and 3D display requirements;
11. Using Ethernet interface and UDP network protocol for stable transmission, the maximum transmission distance is 100 meters;
12. LCD display module displays controller parameters and status in time;
13. Double RJ45 network interface, can realize the hybrid cascade between controllers; The controller detects automatically, and the software displays the connection status intuitively;
14. 8-port output, single-port output standard 512 channels, extended protocol with load points tested by the customer according to the chip characteristics;
15. Supports dual backup. If one controller is faulty or the network cable is disconnected, the system is not affected.
16. Support anti-interference and leakage design between device ports, and interference or failure of a single port does not affect the work of other ports;
17. The device port has over-voltage and over-voltage protection, so that the equipment can be safe and reliable long-term operation;
18. Thousand/hundred megabit adaptive or mandatory hundred megabit can be set up to ensure that the project of large points is more stable;
19. Equipment network port, port output, surge protection: 1.5KV;
20. Support severe working environment -40℃-80℃, trouble-free normal operation.