D47mm Digital Bumper Car RGB Pixel LED Tube Light Guide for Amusement Ride Lighting
D47mm Digital Bumper Car RGB Pixel LED Tube Light for 360° Ride Effects
This guide explains how to select a D47mm digital bumper car RGB pixel LED tube light for amusement parks, bumper car arenas and ride decoration projects. The product uses DC12V input, UCS1903 SPI pixel control, 360 degree lighting, IP66 waterproof structure and regular 0.5m, 1m, 1.5m and 2m length options.
Why Bumper Car Lighting Needs a Different LED Tube
Bumper car lighting is not the same as ordinary decorative tube lighting. The tube is mounted on moving amusement equipment, so it must be bright from multiple directions, support dynamic RGB effects, handle vibration, and remain easy to replace or maintain for venue operators.
360° Visibility
The D47mm round tube structure is designed for all-around visual effect, making the light visible from the front, side and rear of the bumper car arena.
Programmable RGB Effects
UCS1903 SPI control allows chasing, color changing and dynamic pixel effects, helping each bumper car look more attractive during operation.
Amusement Project Use
Suitable for bumper cars, amusement ride decoration, indoor playgrounds, entertainment venues and visual upgrade projects for existing rides.
Core Product Parameters
For B2B buyers, the key parameters are diameter, voltage, IC type, pixel quantity, waterproof grade, power consumption, length options and connector direction. These details affect both installation and controller planning.
| Item | Product Information | Project Note |
|---|---|---|
| Product Type | D47mm digital bumper car RGB pixel LED tube light | Designed for amusement ride decoration and bumper car lighting effects. |
| Model NO. | L-R-D47 | Use this model when confirming samples and quotation. |
| Part NO. | L-B-D47 | Useful for internal order tracking and production confirmation. |
| Light Source | RGB SMD5050 LED chip, 30 LEDs x 6 strips | Six inserted LED strips create a strong 360 degree tube lighting effect. |
| Beam Angle | 360 degree | Important for bumper car arenas where viewers see the ride from many directions. |
| Voltage | DC12V | Confirm power supply and controller plan before bulk order. |
| Diameter | OD47mm, ID32mm | Check the bumper car mounting pole or bracket size before ordering. |
| IC Chip | UCS1903, 10 pixels x 6 strips | Total 60 pixels per tube for programmable RGB effects. |
| Power | 43.2W per tube | Power calculation is required when many bumper cars are connected in one project. |
| Length Options | 0.5m, 1m, 1.5m, 2m; custom length available | Choose length according to bumper car height, ride design and visual effect requirement. |
| Waterproof Grade | IP66 | Useful for humid amusement environments and easier cleaning, but installation sealing should still be checked. |
| Lifetime | 50,000 hours | Suitable for commercial venues that need stable long-term operation. |
| Working Temperature | -20℃ to 60℃ | Check venue temperature and ventilation conditions. |
Real Bumper Car Application Scene
Designed for Bumper Car Arenas
In real amusement projects, the LED tube can be mounted vertically on bumper cars to create a bright moving light column. When multiple cars operate together, RGB chasing and color-changing effects make the arena more active and easier to notice from a distance.
For operators, this kind of lighting upgrade can improve the visual appeal of existing bumper cars without changing the core ride structure. Before ordering, confirm tube length, mounting position, controller type, cable route and power supply plan.
Product Structure and Detail References
The following images show product body, LED strip arrangement, connector direction, tube diameter and component structure. These references are useful for engineering confirmation before sample approval.
Diffused tube and mounting end reference for bumper car installation planning.
Tube body and connector layout for checking input/output direction and cable route.
Internal RGB SMD5050 LED strip and pixel board detail for technical review.
Diameter, End Cap and Tube Material
For bumper car installation, diameter and end cap design are not small details. They affect whether the tube can fit the existing car structure and whether the fixture can be maintained after installation.
End cover and diameter reference: OD47mm and ID32mm.
Transparent synthetic glass, internal light strip and end cap structure reference.
How the Pixel Structure Works
6 LED Strips Inside
The tube uses 6 inserted LED strips, each with 30 LEDs. This structure supports all-around brightness instead of a single front-facing lighting direction.
60 Pixels per Tube
Each strip has 10 pixels, giving a total of 60 pixels per tube. This supports richer chasing and segmented RGB effects.
Mini Controller Sets
The regular configuration can work with mini controller sets. For larger venues, confirm controller capacity and wiring plan before production.
Where This RGB Pixel Tube Can Be Used
Bumper Cars
Vertical body lighting, rear pole lighting, ride identity upgrade and synchronized RGB movement effects.
Amusement Parks
Ride decoration, attraction entrance lighting, indoor playground visual upgrades and entertainment zones.
Event & Stage Props
Temporary installations, moving light props, RGB tube arrays and 360 degree decorative pixel effects.
Information to Confirm Before Ordering
Need RGB Pixel Tubes for Bumper Cars or Amusement Rides?
Send your bumper car photos, tube length, mounting position, voltage requirement, quantity and desired RGB effects. Like Light can help confirm a suitable D47mm digital bumper car LED tube configuration for your project.
FAQ
Is this D47mm LED tube mainly for bumper cars?
Yes. It is designed as a digital RGB pixel tube for bumper car lighting and amusement ride decoration. It can also be used in other 360 degree RGB tube applications if the mounting and wiring match the project.
What is the voltage of this bumper car LED tube?
The product uses DC12V operating voltage. Before ordering, confirm the power supply, total tube quantity and controller plan to avoid overload.
How many pixels are inside one tube?
The tube uses 6 LED strips, each strip with 10 pixels, giving a total of 60 pixels per tube. This supports programmable RGB chasing and dynamic effects.
Can the length be customized?
Yes. Regular lengths include 0.5m, 1m, 1.5m and 2m, and custom length is available depending on project requirements.
What should I send for quotation?
Please send tube length, quantity, mounting position, bumper car photos, controller requirement, connector direction and whether you are replacing old tubes or building a new ride lighting system.
