2024-04-17

Introduction to the SP108E controller

1.product parameters:

1:DC5-24V wide voltage input, the power supply has anti-reverse connection function

2: Mobile APP control, remote control distance.

3: Support routing mode and LAN connection mode, suitable for a variety of occasions

4: brightness can be adjusted; RGB channel sequence is adjustable; Built-in 180 kinds of pattern effects and 8 kinds of adjustable color effects

5: You can select mobile phone pictures for preview or hold, up to 12 recording effects can be saved

6: adjustable number of segments and points, up to 2048 pixels.

7: has the function of saving setting parameters after power failure.

8: Net weight 40g. Gross weight 65g 9: Size :85mm*45mm*22mm

2. support IC:

SM16703.TM1804.UCS1903.WS2811.WS2801.SK6812.SK6812RGBW.TM1914.TM1913. LPD6803.LPD8806.SK9822.TM1814.GS8206.GS8208.TX1812. TX1813.INK1003.APA102. APA105.DMX512.P9813.P943S.P9411.P9413.P9414 P9412.(All the above IC apps can be selected, Android, Apple mobile phone can be used) Product application: App Store, Google Play, App treasure search "LedShop" to find the APP

3. technical parameters:

Operating temperature :-20℃~60℃;

Working voltage :DC5V~24V;

Working current :20mA~90mA;

Remote control distance :30M; Size :80mm*41mm*20mm;

Net weight :40g; Certification :CE, RoHS;

4. Working mode and connection mode:

The controller supports two modes of operation:

Routing mode (AP):

In this mode, the phone is directly connected to the controller, and the controller acts as a connection hotspot. When the controller is not connected to any WIFI network, the controller will automatically switch to AP mode after 20 seconds of power-on. The user needs to first locate the wireless hotspot named SP108E xxx on the WIFI setting page of the mobile phone, and then connect to it. The default password is 12345678.

Local Area Network Connection Mode (STA) mode:

In this mode, the phone and the controller are in the same LAN at the same time, and users in the LAN can control it at any time. In the case that the controller is not connected to any WIFI network, it is in the state of waiting for the distribution network within 20 seconds after power-on. If you need to connect the controller to the wireless network, first make sure that the mobile phone is connected to the WIFI network, enter the APP, click the button to add the device, enter the current WIFI password, click the button to confirm and wait for the completion of the distribution network. To remove the controller from the current network, select the controller and click Remove Device.